W55MH32 Application Development Kit Guide

W55MH32 Application Kit is set of modular sensors served for the W55MH32 Application Kit board.

Our board uses a unified interface design, making it easy for users to quickly build various electronic projects. There are many types of Grove sensors, including but not limited to temperature sensors, humidity sensors, light sensors, gas sensors, and more.

Sensor Collections

Connection

WIZM-433TR3L

WIZM-433TR3L

WIZM-433TR3L is a compact 433MHz wireless RF transceiver module powered by the Ling-TR3L core IC. Featuring a standard UART interface, it allows microcontrollers to easily send and receive serial data over long-range 433MHz ISM radio frequency bands. Dual connection headers (keyed JST-style connector and 2.54mm pitch through-holes) make it ideal for wireless telemetry, remote control, and IoT telemetry links.

ADK-BuyBuy now

ADK-RedirectLearn more


Control

WIZM-JOYSTICK

WIZM-JOYSTICK

WIZM-JOYSTICK is a 2-axis analog rocker joystick module equipped with an integrated push-button switch. Operating at 3.3V, it provides proportional analog voltage outputs for X and Y coordinates along with a digital output for button clicks, enabling directional control and user input for embedded interfaces and robotics.

ADK-BuyBuy now

ADK-RedirectLearn more


Display

WIZM-LED3

WIZM-LED3

WIZM-LED3 is a 5-pin traffic light module that provides an intuitive visual signaling display by integrating discrete red, yellow, and green LEDs in a common anode configuration. Powered via dedicated 3V3 and GND pins, the active-low R, Y, and G control inputs allow independent sinking control over each colored indicator.

ADK-BuyBuy now

ADK-RedirectLearn more


Sensor

WIZ-OSHW-TH-01

WIZ-OSHW-TH-01

WIZ-OSHW-TH-01 is a high-precision Temperature & Humidity sensor module powered by the AHT20 IC. Utilizing a standard I2C digital interface with dedicated 3.3V and GND pins, it features dual breakout connection options for effortless integration into environmental monitoring and IoT systems.

ADK-BuyBuy now

ADK-RedirectLearn more

WIZM-EC11

WIZM-EC11

WIZM-EC11 is an incremental rotary encoder module featuring an integrated push-button switch. Designed for precise rotational input and user interface navigation, it outputs 2-phase quadrature signals (Channel A and Channel B) alongside an integrated momentary push-button switch (S) via standard 2.54mm headers and a keyed connector.

ADK-BuyBuy now

ADK-RedirectLearn more

WIZM-LDR

WIZM-LDR

WIZM-LDR is a light detection sensor module featuring an onboard photoresistor (LDR) and an LM393DR dual voltage comparator. It provides dual output modes: an analog output (AI) for continuous ambient light intensity measurement, and a digital output (DI) for threshold-based light level detection adjustable via an onboard potentiometer.

ADK-BuyBuy now

ADK-RedirectLearn more

WIZM-POT

WIZM-POT

WIZM-POT is an analog rotary potentiometer module featuring an onboard 10kΩ potentiometer (RV09-103E). Powered via 3.3V and GND, it outputs a continuous analog voltage proportional to the rotational position of the knob via its analog output pin (A1), making it ideal for volume control, parameter tuning, sensor threshold adjustment, and user input interfacing.

ADK-BuyBuy now

ADK-RedirectLearn more

WIZM-QRE1113

WIZM-QRE111

WIZM-QRE1113 is a reflective object sensor module based on the QRE1113 miniature optical sensor. Designed for proximity detection, surface sensing, and automated line tracking, it integrates an infrared emitting diode and an NPN phototransistor. Operating at 3.3V, it outputs a digital GPIO signal (DO) corresponding to the presence or absence of a reflective surface.

ADK-BuyBuy now

ADK-RedirectLearn more